Clears any pool, every time.
Clears any pool, every time.
Revive! (®) START UP/CLEAN UP is a multi-action product that removes phosphates (algae food), metals including copper and iron, scaling carbonates, organic debris and other contaminants that cause cloudy water. It is formulated for use on new pool startups, replaster / remodel / refills, spring openings, abandoned pools, severe algae cleanups and ongoing maintenance of all swimming pools.
Revive! (®) WEEKLY is compatible with all pool chemicals, sanitizers and finishes. Plus, it will not cloud the water or stain the pool.
Revive! does the work of several products – phosphate remover, metal treatment, flocculant and clarifier.
- Ideal for well water
- Perfect for all pools at startup
- Excellent for severe algae cleanups
- Naturally restores water quality within hours of application
- Removes orthophosphates up to 2000 ppb
- Removes copper and iron up to 2.0 ppm
- Captures scaling carbonates
- Clears water of organic debris
Revive! is an ideal treatment for:
- Preventing scale on salt system equipment
- Protecting new pool surfaces from stains
- Reducing plaster dust on new pools and remodels
Revive! after 48 hours
Remove spray applicator and pour Revive!® into the deep end of the pool as filling begins (32oz per 24,000 gallons). As the water level rises, Revive!® will treat the pool surfaces and source water. When filling is complete, brush/vacuum any settled debris and begin regular water care program.
If algae is present, brush walls and shock pool prior to application (for best results, circulate for 60 minutes). Turn off pump/filter system. Attach a garden hose to Revive! bottle and spray entire contents over pool surface (5-7 minutes). Wait 24-48 hours for debris to settle to pool bottom then slowly vacuum to waste. After vacuuming, run filter for 24 hours.
TIPS: Highly contaminated pools typically require two or more bottles. Allow additional time for Revive! to work in cold water. Revive! cannot be overdosed – the more it’s used, the more contaminants are removed. Rarely, particles may collect on the surface – just spray with a garden hose to break them up.
With filtration system running, attach a garden hose to the Revive!® bottle and spray over the pool surface twice. Revive!® will work with the pool filtration system to remove clouding particles, phosphates, metals, and other debris. Reapply weekly for best results.
What is Revive!?
Revive! is a multi-action product that removes phosphates (algae food), metals including copper and iron, scaling carbonates, organic debris and other contaminants that cause cloudy water and stain pool surfaces. It’s fast-acting formula quickly clears the water without the need to pre-balance or pre-treat the pool.
Why is Revive! better than other products?
Revive! clears pool water fast and easy! Other products can take several days to work, and require special balancing which can cloud water and clog the filter. Revive! does not require any pre-balancing, is compatible with all pool chemicals and will not cloud water or clog your filter. Revive!’s “silt technology” even allows fast vacuuming of severe cleanups without dusting or clouding the water. Revive! does the work of several products by simultaneously removing phosphates, metals, scaling carbonates, and organic debris in one easy application.
How is Revive! packaged?
Revive! is conveniently packaged in 32oz ergonomic bottle with a hose-end sprayer top designed for even distribution over your entire pool. Also available in 1 gallon, 5 gallon and 30 gallon service sizes.
Where can I get Revive!?
Revive! is available exclusively from swimming pool and spa professional retailers. CLICK HERE for more information.
Should I spray or pour?
When dealing with a troubled pool, spraying Revive! is the best option. For maintenance dosage or when vacuuming debris is not viable, pouring Revive! through the skimmer and letting the pump run is the best option.
I used Revive! but my pool is still green?
Revive! is not designed to work on green pools alone, see “Green Tint or Cloudy Treatment Protocol” instructions (page 15).
What’s the shelf life of Revive! ?
With proper storage, as noted on product label, Revive!® has a 48 month shelf life.
Can I still use your product if it’s raining?
I used Revive! and my pool is still cloudy?
See “Extremely Cloudy Water” instructions on page 15.
I used Revive! and now there is a foam on the surface.
The issue is caused by high surface tension. Keep the pump off and use a garden hose with a hose end sprayer and spray the pool surface for 5 minutes. Keep the pump off for another 2448 hours until debris falls to floor of pool. Continue with vacuum instructions on product label.
Is Revive! for pool clean-ups only?
Revive! START UP/CLEAN UP is formulated for use on new pool startups, replaster/remodel/refills,spring openings, abandoned pools, severe algae cleanups and for ongoing maintenance use Revive! WEEKLY. Revive! does the work of several products, phosphate remover, metal treatment, flocculant and clarifier and scale inhibitor.
Read What Pool Owners are Saying about Revive!
“Just wanted to thank you for a great product. After four weeks of trying several different products and also adding way too much chlorine, we can finally see the bottom of our pool. Added Revive!® at 6PM last night, by the time we went to bed, we could notice a difference and when I got up this morning everything had settled to the bottom. Used the vacuum for about an hour this morning and were swimming this afternoon. Will probably have to vacuum once more, but so glad this product was recommended to us. ”
– Donna, Ohio
“I just thought I’d let you know the Revive!® really cleaned up our pool. Before we used it the pool was cloudy and would not clear up. After spraying the Revive!® on the surface the next morning the pool was clear and bright. Thanks again!”
– Chad C., Indiana
Want to share your success story? Send us an email and your testimonial could be featured!
Whitefly Honeydew Swimming Pool Cleanup
Whitefly infestations have recently become a growing concern in South Florida and other markets. Along with attacking the landscape and damaging agriculture, whiteflies are causing quite a mess with their honeydew excrement. Plants, walkways, cars, outdoor furniture and even swimming pools have become covered with this sticky substance and the sooty mold it promotes. But it’s not just the pool’s appearance that is affected. This residue drastically affects the chemical balance of the pool water by extremely decreasing sanitizer effectiveness. Almost overnight, the water becomes cloudy and green and continues to deteriorate until treated while the sticky substance clogs the filter.
Unfortunately these infestations are NOT seasonal, whiteflies breed year round and their population is expected to increase and spread. While they should dissipate with time, these pests will likely never go away completely. With that being said, it is important to know how to control these whiteflies and their effects.
While the plants are best treated by a licensed exterminator or by using approved products from your garden center,
we have a simple solution for your swimming pool:
- Thoroughly clean the pool filter.
- Shock the pool with a granular or liquid chlorine.
- Apply a full bottle of 32oz Revive!® (pools up to 24K gallons) over the pool surface and set the pump/filter to run continuously.
- After 48 hours thoroughly clean the filter and skimmer basket. You may also need to vacuum the pool bottom.
- Maintain clear water by applying 8oz of Revive!® weekly and cleaning the filter every two weeks.
For more information please visit University of Florida’s Whitefly website: www.flwhitefly.org/.