fbpx

11 – Ways to use RevivePRO®

Written by System X Designs. Posted in How to use

How to Use RevivePRO®   

RevivePRO® Automated Application 

(POOL) Dosage Guidelines: 

Injection Ratio: 1.0 ounce per 10,000 gallons daily

(SPA) Dosage Guidelines:

Injection Ratio: 1.0 ounce per 2,000 gallons daily

 

 *(Additional information about automated feed equipment can be found in the EZPRO Automation Section of the myAPiWater App)*

                                                              

RevivePRO® Manual Application

(POOL) Dosage Guidelines: 

8.75 ounces per 10,000 gallons weekly

(SPA) Dosage Guidelines:

11.2 ounces per 2,000 gallons weekly

*(RevivePRO® is designed to be sprayed over surface of the pool water, utilize a garden sprayer or a 32 oz. hose-end sprayer to apply)*

                                                                                    

RevivePRO® Startup

NEW CONSTRUCTION or RENOVATION

- FRESH FILL-

32 ounces per 24,000 gallons during fill

Pour RevivePRO® into the deep end of the pool as filling begins.  As the water level rises RevivePRO® will treat the pool surfaces and source water.  When filling is complete, brush/vacuum any settled debris and begin with regular water care program. 

                                                             

RevivePRO® Cleanup

PHOSPHATE BUILDUP, METALS, SEVERE ALGAE, or SCALING

- FILLED POOL-

32 ounces per 24,000 gallons

If algae is present, brush walls and shock pool prior to application (for best results, circulate for 60 minutes).  Turn off pump/filter system.  Fill a garden sprayer or 32 oz. hose-end sprayer with RevivePRO® and apply 32 ounces per 24,000 gallons of water over the pool surface.  Wait 24 to 48 hours for debris to settle to pool bottom then slowly vacuum to waste.  After vacuuming resume normal filtration

                                                             

RevivePRO® Maintain

ROUTINE PROBLEM SOLVING or PREVENTATIVE MAINTENANCE

- FILLED POOL-

3-4 ounces per 24,000 gallons

With Filtration system running fill a garden sprayer or 32 oz. hose-end sprayer with RevivePRO® and spray 3-4 ounces per 24,000 gallons over the pool surface.  RevivePRO® will work with the pool filtration system to remove clouding particles, phosphates, metals, and debris.  Reapply weekly or as needed for best results.

                                                                                   

 TIPS:

  • Highly Contaminated pools typically require a double dosage.
  • Allow additional time for RevivePRO® to work in cold water.
  • RevivePRO® cannot be overdosed - the more used, the more contaminates are removed.
  • Rarely, particles may collect on the surface - spray with a garden hose to break them up. 
  • When using RevivePRO® on pools utilizing cartridge filters it may be necessary to 1/2 the dosage if filtration is continued after application. 

Print