Start-up: New pool construction or renovation (unfilled pool) Remove spray applicator and pour Revive!® into the deep end of the pool as filling begins (32oz per 24,000 gallons). As the water level rises, Revive!® will treat the pool surfaces and source water. When filling is complete, brush/vacuum any settled debris and begin regular water care program.
Clean Up: Phosphate build-up, severe algae, metals, or scaling (filled pool) If algae is present, brush walls and shock pool prior to application (for best results, circulate for 60 minutes). Turn off pump/filter system. Attach a garden hose to Revive!® bottle and spray entire contents over pool surface (5-7 minutes). Wait 24-48 hours for debris to settle to pool bottom then slowly vacuum to waste. After vacuuming, run filter for 24 hours.
TIPS: Highly contaminated pools typically require two or more bottles. Allow additional time for Revive!® to work in cold water. Revive!® cannot be overdosed – the more it’s used, the more contaminants are removed. Rarely, particles may collect on the surface – just spray with a garden hose to break them up. Spraying REVIVE® on green pool Green to Blue Vacuuming Evolution Pool Service
Maintain: Routine problem-solving and preventative maintenance With filtration system running, attach a garden hose to the Revive!® bottle and spray over the pool surface twice. Revive!® will work with the pool filtration system to remove clouding particles, phosphates, metals, and other debris. Reapply weekly for best results.
Tags: April, 2018