APi’s commercial and service programs are proven to save time and money while improving the overall water quality. Regardless of the size, pools, and spas managed with the Revive!® and E-Z POOL® programs have been shown to experience:
- Reduced CYA levels and chloramines
- Reduced chemical and labor costs
- Reduced time poolside for retesting, rebalancing and troubleshooting
- Incredible water quality and swimmer experience!
Read other Dealers’ Experience with APi Products in Commercial Pools!
E-Z POOL® is a proprietary water care program that combines simplicity with incredible water quality in a simple weekly application. This specially blended, multi-tasking formula helps the management of swimming pool water while eliminating the confusion of adding multiple chemicals and constant re-testing.
E-Z POOL® contains a stable oxidizer, algaecide, clarifier, scale inhibitor, water conditioner and balancers (pH, Total Alkalinity, and Calcium Hardness) to keep swimming pool water clean, clear and trouble free. E-Z POOL® is not dependent on cyanuric acid but helps to maintain already low CYA readings.
It provides a PROACTIVE water care program that PREVENTS problems instead of treating them on a REACTIVE basis after they occur. E-Z POOL® is compatible with chlorine, salt, bromine, UV and ozone as well as all traditional balancers and maintenance chemicals.SideSwimmer
- Convenient and easy to use – just twice-a-week!
- Oxygen-enriched water promotes a pristine swimming environment
- Eliminates problems associated with harsh chemicals
- Less chemicals, less testing and less hassle!
- No waiting to SWIM!
- E-Z POOL® provides the easiest, cleanest, and most convenient solution to commercial pool water care
Proactive Pool Care in a Bucket
- The stable oxidizer immediately breaks down 20LBsE-ZPloolwater borne contaminants to increase sanitizer effectiveness – resulting in clean, clear water
- The patented algaecide formula becomes more effective the long E-Z POOL® is used
- E-Z POOL® inhibits scale build up and metallic staining on pool surfaces and equipment
- E-Z POOL® clarifies and conditions to provide sparkling clear water that is soft to swim in without leaving harsh chemical residue on bathers skin, hair, or bathing suits
- The uniquely blended formula creates a stable and balanced pool water environment, virtually eliminating chloramines, excessive testing and unnecessary chemical additions
- E-Z POOL® extends the life of chlorine generator cells by inhibiting scale and other build up while limiting troublesome pH drift
Effectively Manages Pool Chemical Costs
E-Z POOL® provides a residual oxidizer and pairs effectively with UV, Cal-Hypo, Salt, Liquid Chlorine and Acid Systems, and Traditional Chlorine Tablets
E-Z POOL® improves air quality by virtually eliminating chloramines
E-Z POOL® and SALT
The perfect companion for salt water pools! E-Z POOL® optimizes water quality, chlorine generator life and generator performance. It protects form stain and scale, oxidizes contaminants and eliminates pH drift.
Commercial Instructions: Start Up and Beyond
- Backwash filter (see below for initial cleaning).
- Apply 1 gallon of Revive!® over the surface of pool using sprayer or the 32oz spray bottle. Revive!® phosphates, metals, debris and to activate the No Algae Guaranteed.
- Filter for 48 hours.
- Backwash filter.
- Balance pool water as follows: Calcium Hardness 350 ppm | pH 7.2-7.6 | Total Alkalinity 100-120 ppm
- Add 10 scoops of E-Z POOL® (each bucket contains an 8oz scoop) directly in front of return jet deepest spot in pool or pre-dissolve in bucket then pour into pool.
- Backwash filter.
- Apply ½ gallon of Revive!® over surface of pool using sprayer.
- Add 10 scoops of E-Z POOL®.
- Add 10 scoops of E-Z POOL®.
- Proceed with normal backwash cycle.
- Apply ½ gallon of Revive!® over surface of pool using sprayer.
- Add 10 scoops of E-Z POOL®.
- Add 10 scoops of E-Z POOL®.
- Add 10 scoops of E-Z POOL® twice a week and apply ½ gallon of Revive!® weekly.
- Proceed with normal backwash cycle.
Note: Must maintain required minimum Free Chlorine readings per local health regulations
Calcium Hardness 350 ppm | pH 7.2-7.6 | Total Alkalinity 100-120 ppm
SAND FILTER ACID WASH DIRECTIONS
This process thoroughly cleans the filter and prepares it for the EZ SPA® program.
1. By-pass heater.
2. Isolate each filter for individual filter acid clean and follow process for each sand filter.
3. Put filter on backwash cycle and add 2 lbs of sodium bi-carb into skimmer. Wait 30 to 40 seconds, then add 2 gallons of muriatic acid into skimmer. Allow filter to backwash 3 to 5 minutes.
4. Rinse filter 2 to 3 minutes, then back to normal filter cycle.
Revive!® is a multi-action product that removes phosphates, metals including copper and iron, scaling carbonates, organic debris and other contaminants that cause turbidity in pool water. Revive!® is formulated for use with any pool sanitizer, chemical, or finish. It is very effective for us on new pool start-ups, replaster/remodel jobs, refills, Spring openings, severe algae clean ups, abandoned pools and for ongoing maintenance of all swimming pools.
Revive!® An Ideal Treatment
- Reduces plaster dust on new pools and remodels
- Cuts down on needless follow ups and extra inventory
- Maintains low phosphate levels
- Removes copper and iron
- Prevents scale buildup on system equipment
- Protects pool surfaces from staining
- Effective in high chlorine conditions
MAINTAIN
Routine Problem-Solving and Preventative Maintenance
Continue to circulate pool. Pour Revive!® into the skimmer or spray over pool surface at a rate of 1 quart per 50,000 gallons. Clean filter 48 hours later or as filter pressure dictates. For best results, repeat weekly.
CLEAN UP
Turbidity Issues, High Metals, Phosphate Buildup and Severe Algae Contamination
Note: Double Dosage is recommended for heavily contaminated pools. If algae is present, brush pool walls and shock pool water prior to application.
Turn off circulation pump. Spray Revive!® over pool surface using the quart bottle applicator, backpack sprayer, or other spray application at a rate of 1 gallon per 100,000 gallons of pool water. Wait 24-28 hours with circulation still off, depending on extent of problem, for debris to settle to pool floor. Vacuum sediment to waste. Once pool floor is clean, restart circulation. Backwash filter 48 hours later or as filter pressure dictates.
START UP
New Pool Construction or Renovation
While initially filling a pool, pour Revive!® into the pool basin after floor is covered with fill water at a rate of 1 quart per 25,000 gallons. As water level rises Revive!® will treat pool surfaces and source water providing clean and clear water resulting in less time pool side and fewer call-backs. When filling is complete brush toward main drains (vacuum to waste for vinyl).
EZ SPA® TOTAL CARE is a blended granular product that is applied weekly. EZ SPA® TOTAL CARE has been formulated for use in any spa and will help manage water while eliminating the confusion of adding multiple chemicals daily. Water treated with EZ SPA® TOTAL CARE will be balanced, scale free, stain free, foam free, clear and order free! The concentrated formula creates a proactive water care program that prevents problems instead of treating them on a reactive basis. This results in less down-time, call backs, follow up, closures, unhappy bathers, and headaches.
Commercial Startup
1. Backwash and chemically clean the filter. Sand filters should follow acid clean directions below.
2. Treat with 1oz of Revive!® per 500 gallons by pouring the Revive!® in front of a jet while the pump is running.
3. Pre-dissolve or broadcast 1oz of EZ SPA® TOTAL CARE per 100 gallons of spa water.
4. REGULARLY: Treat spa water with Revive!® once a week with 1oz per 1,000 gallons of spa water and EZ SPA® TOTAL CARE with 1oz per 200 gallons twice weekly.
Note: Must maintain required minimum Free Chlorine readings per local health regulations
Calcium Hardness 350 ppm | pH 7.2-7.6 | Total Alkalinity 100-120 ppm
SAND FILTER ACID WASH DIRECTIONS
This process thoroughly cleans the filter and prepares it for the E-Z POOL® program.
1. By-pass heater.
2. Isolate each filter for individual filter acid clean and follow process for each sand filter.
3. Put filter on backwash cycle and add 2 lbs of sodium bi-carb into skimmer. Wait 30 to 40 seconds, then add 2 gallons of muriatic acid into skimmer. Allow filter to backwash 3 to 5 minutes.
4. Rinse filter 2 to 3 minutes, then back to normal filter cycle.