fbpx
  • Ez Pool

Revive

Clears any pool, every time.


  • Revive!® START UP/CLEAN UP is a multi-action product that removes phosphates (algae food), metals including copper and iron, scaling carbonates, organic debris and other contaminants that cause cloudy water. It is formulated for use on new pool startups, replaster / remodel / refills, spring openings, abandoned pools, severe algae cleanups and ongoing maintenance of all swimming pools.

    Revive!® WEEKLY is compatible with all pool chemicals, sanitizers and finishes. Plus, it will not cloud the water or stain the pool.

    Revive!® does the work of several products – phosphate remover, metal treatment, flocculant and clarifier.


    • Ideal for well water
    • Perfect for all pools at startup
    • Excellent for severe algae cleanups
    • Naturally restores water quality within hours of application
    • Removes orthophosphates up to 2000 ppb
    • Removes copper and iron up to 2.0 ppm
    • Captures scaling carbonates
    • Clears water of organic debris

    Revive!® is an ideal treatment for:

    • Preventing scale on salt system equipment
    • Protecting new pool surfaces from stains
    • Reducing plaster dust on new pools and remodels

     

    Revive!® after 48 hours

    Before

    Before

    10 Minutes later

    10 Minutes later

    24 Hours later

    24 Hours later

    48 Hours later

    48 Hours later

  • Start Up
    New pool construction or renovation (unfilled pool)

    Remove spray applicator and pour Revive!® into the deep end of the pool as filling begins (32oz per 24,000 gallons). As the water level rises, Revive!® will treat the pool surfaces and source water. When filling is complete, brush/vacuum any settled debris and begin regular water care program.

    Empty Pool
    Clean Up
    Phosphate build-up, severe algae, metals, or scaling (filled pool)

    If algae is present, brush walls and shock pool prior to application (for best results, circulate for 60 minutes). Turn off pump/filter system. Attach a garden hose to Revive!® bottle and spray entire contents over pool surface (5-7 minutes). Wait 24-48 hours for debris to settle to pool bottom then slowly vacuum to waste. After vacuuming, run filter for 24 hours.

    TIPS: Highly contaminated pools typically require two or more bottles. Allow additional time for Revive!® to work in cold water. Revive!® cannot be overdosed – the more it’s used, the more contaminants are removed. Rarely, particles may collect on the surface – just spray with a garden hose to break them up.

    Spraying REVIVE on green pool
    Green to Blue Vacuuming Evolution Pool Service
    Maintain
    Routine problem-solving and preventative maintenance

    With filtration system running, attach a garden hose to the Revive!® bottle and spray over the pool surface twice. Revive!® will work with the pool filtration system to remove clouding particles, phosphates, metals, and other debris. Reapply weekly for best results.

    Applying Revive!
    • What is Revive!®?

      Revive!® is a multi-action product that removes phosphates (algae food), metals including copper and iron, scaling carbonates, organic debris and other contaminants that cause cloudy water and stain pool surfaces. It’s fast-acting formula quickly clears the water without the need to pre-balance or pre-treat the pool.

    • Why is Revive!® better than other products?

      Revive!® clears pool water fast and easy! Other products can take several days to work, and require special balancing which can cloud water and clog the filter. Revive!® does not require any pre-balancing, is compatible with all pool chemicals and will not cloud water or clog your filter. Revive!®’s “silt technology” even allows fast vacuuming of severe cleanups without dusting or clouding the water. Revive!® does the work of several products by simultaneously removing phosphates, metals, scaling carbonates, and organic debris in one easy application.

    • How is Revive!® packaged?

      Revive!® is conveniently packaged in 32oz ergonomic bottle with a hose-end sprayer top designed for even distribution over your entire pool. Also available in 1 gallon, 5 gallon and 30 gallon service sizes.

    • Where can I get Revive!®?

      Revive!® is available exclusively from swimming pool and spa professional retailers. CLICK HERE for more information.

    • Should I spray or pour?

      When dealing with a troubled pool, spraying Revive!® is the best option. For maintenance dosage or when vacuuming debris is not viable, pouring Revive!® through the skimmer and letting the pump run is the best option.

    • I used Revive!® but my pool is still green?

      Revive!® is not designed to work on green pools alone. Green pools are caused by one of two things; algae or high levels of copper. To diagnose which issue a pool has it must be determined whether the pool is green and clear (copper) or green and cloudy (algae).

      If the water is green and cloudy, indicating the presence of algae, the following treatment protocol should be followed:

      1. Balance water
      2. Treat algae with chlorinated shock product at a rate of 4# granular or 4 gallons liquid per 10k gallons of pool water and/or algaecide
      3. Following “problem solving” label instructions on the bottle, after algae has dissipated, turn off the circulation system, spray 64oz Revive!® START UP/CLEAN UP per 24k gallons of pool water over pool surface, depending on the severity of the initial algae issue, keep pool pump turned off for 24-48 hours
      4. As time passes, debris will form on the floor of the pool as the pool water gradually clears, once the water is clear, vacuum the debris through the waste portal on the valve of the sand or DE filter
      5. For cartridge filter pools, vacuum the debris to the filter then clean the cartridge element
      6. Resume normal pool maintenance program or begin the E-Z POOL® or PEPPER® program

      If the water is green and clear, indicating the presence of copper, the following treatment protocol should be followed:

      1. Balance water
      2. After balanced, turn off pump for 24-48 hours
      3. Spray up to 64oz of Revive!® START UP/CLEAN UP per 24k gallons of pool water over pool surface, depending on the severity of the initial copper issue
      4. As time passes, debris will form on the floor of the pool as the pool water gradually clears
      5. Once the water is clear, vacuum the debris through the waste portal on the valve of the sand or DE filter. For cartridge pool filters, vacuum the debris to the filter then clean the cartridge element
      6. Resume normal pool maintenance program or begin the E-Z POOL® or PEPPER® program
    • What’s the shelf life of Revive!® ?

      With proper storage, as noted on product label, Revive!® has a 48 month shelf life.

    • Can I still use your product if it’s raining?

      Yes!

    • I used Revive!® and my pool is still cloudy?
      1. Balance water
      2. After water is balanced, turn off pump for 24-48 hours
      3. Spray up to 64oz Revive!® START UP/CLEAN UP per 24k gallons of pool water over pool surface
      4. Keep pool pump turned off for 24-48 hours. As time passes, debris will form on the floor of the pool and the pool water will gradually clear at the same time
      5. Once the water is clear, vacuum the debris though the waste portal on the valve of the sand or DE filter. For cartridge filter pools, vacuum the debris to the filter then clean the cartridge element
      6. Resume normal pool maintenance program or begin the E-Z POOL® or PEPPER® program
    • I used Revive!® and now there is a foam on the surface.

      The issue is caused by high surface tension. Keep the pump off and use a garden hose with a hose end sprayer and spray the pool surface for 5 minutes. Keep the pump off for another 24- 48 hours until debris falls to floor of pool. Continue with vacuum instructions on product label.

    • Is Revive!® for pool clean-ups only?

      Revive!® START UP/CLEAN UP is formulated for use on new pool startups, replaster/remodel/refills,spring openings, abandoned pools, severe algae cleanups and for ongoing maintenance use Revive!® WEEKLY. Revive!® does the work of several products, phosphate remover, metal treatment, flocculant and clarifier and scale inhibitor.

  • Read What Pool Owners are Saying about Revive!®

    “Just wanted to thank you for a great product. After four weeks of trying several different products and also adding way too much chlorine, we can finally see the bottom of our pool. Added Revive!® at 6PM last night, by the time we went to bed, we could notice a difference and when I got up this morning everything had settled to the bottom. Used the vacuum for about an hour this morning and were swimming this afternoon. Will probably have to vacuum once more, but so glad this product was recommended to us. ”

    – Donna, Ohio

    “I just thought I’d let you know the Revive!® really cleaned up our pool. Before we used it the pool was cloudy and would not clear up. After spraying the Revive!® on the surface the next morning the pool was clear and bright. Thanks again!”

    – Chad C., Indiana

  • Before Revive Priceless Pools

    Before

    After 30 Minutes Priceless Pools

    30 Minutes Later

    Over 24 Hours After With Algae Settled Priceless Pools

    24 Hours Later

    Less Than 72 Hours After Priceless Pools

    72 Hours Later

    Before1

    Before

    10 Minutes Later

    24 Hours Later

    After

    Before

    Few Hours Later

    48 Hours Later

    72 Hours Later

  • Whitefly Honeydew Swimming Pool Cleanup

    Whitefly infestations have recently become a growing concern in South Florida and other markets. Along with attacking the landscape and damaging agriculture, whiteflies are causing quite a mess with their honeydew excrement. Plants, walkways, cars, outdoor furniture and even swimming pools have become covered with this sticky substance and the sooty mold it promotes. But it’s not just the pool’s appearance that is affected. This residue drastically affects the chemical balance of the pool water by extremely decreasing sanitizer effectiveness. Almost overnight, the water becomes cloudy and green and continues to deteriorate until treated while the sticky substance clogs the filter.

    whitefly cleanup

    Unfortunately these infestations are NOT seasonal, whiteflies breed year round and their population is expected to increase and spread. While they should dissipate with time, these pests will likely never go away completely. With that being said, it is important to know how to control these whiteflies and their effects.

    While the plants are best treated by a licensed exterminator or by using approved products from your garden center,
    we have a simple solution for your swimming pool:

    1. Thoroughly clean the pool filter.
    2. Shock the pool with a granular or liquid chlorine.
    3. Apply a full bottle of 32oz Revive!® (pools up to 24K gallons) over the pool surface and set the pump/filter to run continuously.
    4. After 48 hours thoroughly clean the filter and skimmer basket. You may also need to vacuum the pool bottom.
    5. Maintain clear water by applying 8oz of Revive!® weekly and cleaning the filter every two weeks.

Have more questions?

 
Follow Us

  • "Just wanted to thank you for a great product. After four weeks of trying several different products and also adding way to much chlorine, we can finally see the bottom of our pool. Added Revive!® at 6PM last night, by the time we went to bed, we could notice a difference and when I got up this morning everything had settled to the bottom. Used the vacuum for about an hour this morning and were swimming this afternoon. Will probably have to vacuum once more, but so glad this product was recommended to us."
    - Donna, Ohio
  • "Easy, simple, worry free…these all describe how my pool maintenance has been since I started using EZ POOL! I have a big pool and it is not a big job with E-Z POOL®, just once a week. Once the pool is open and clear in the spring, I just have Caryl’s experts test my pool sample once a week to make sure the balancing chemicals and pH are good. Algaecides are not needed. Brush, brush, brush, as Caryl recommends and my pool is beautiful all summer! Also, it is gentle to the skin and does not effect your hair color. I highly recommend E-Z POOL®!"
    - Trish, Greensboro, NC
  • “I have used the EZ Spa® now for four years. It is the best spa treatment I have ever used. It makes the water feel really soft and refreshing. I use it once a week and forget it. My spa stays crystal clear. I love this stuff. Not to mention when you use EZ Spa® you don’t have to buy so many other chemicals. I also noticed that EZ Spa® is extremely gentle on the skin. I can’t say enough about how good this stuff is. Try it, you’ll love it!”
    - Terri G., NJ

Quick Contact

This field cannot be blank.

Invalid Input

Captcha
Invalid Input