EZ SPA® is a water care program that combines simplicity and incredible water quality in a once-a-week application. This specially blended formula manages spa water while eliminating the confusion of adding multiple chemicals every other day.
EZ SPA® TOTAL CARE contains a clarifier, stable oxidizer, scale and stain inhibitor, water conditioner, and balancers (pH, TA and CH) to keep spa water clean, clear and trouble free. Spa water treated with EZ SPA® TOTAL CARE is odor and foam free. The concentrated formula creates a PROACTIVE water care program that PREVENTS problems instead of treating them on a REACTIVE basis after they occur. EZ SPA® is compatible with ozone and mineral purifiers as well as traditional sanitizers and balancers.
- Convenient and easy to use – just once-a-week
- Superior water quality with less chemicals and testing
- Formulated for use with chlorine, bromine, salt, ozone and mineral purifiers
Don’t be puzzled by spa water maintenance. EZ SPA® is the solution!
So Simple! Just add once-a-week!
IMPORTANT: Always start with fresh water (drain and refill) and a clean filter. Circulate the spa water with the jets on when adding chemicals to the water. For best results, circulate and filter the water at least eight hours daily. EZ SPA® TOTAL CARE will manage water balance, but we recommend testing monthly as bather load and refill water can affect levels. Always test before adding chemicals and circulate for 30 minutes before testing again.Start Up
- Add START to remove metals, phosphates, scaling carbonates and organic debris.
- Add UP, DOWN, and CAL as needed to balance spa water.
Total Alkalinity 80-120 ppm
Calcium Hardness 300-400 ppm
- Add EZ BOOST at a dose of ½ oz per 100 gallons.
- Add TOTAL CARE at a dose of 1 oz per 100 gallons. For spas using ozone, mineral purifiers or salt add just ½ oz per 100 gallons.
- After 12 hours rinse the cartridge filter.
- Add E-Z BOOST at a dose of 1/8 oz per 100 gallons.
- Add TOTAL CARE at a dose of 1 oz per 100 gallons. For spas using ozone, mineral purifiers or salt add ½ oz per 100 gallons.
- Rinse cartridge filter.
What is EZ SPA® TOTAL CARE?
EZ SPA® TOTAL CARE is a proprietary, multi-function granular compound for spa water care. It combines a clarifying agent, stable oxidizer, scale inhibitor, water conditioner and balancers (pH, TA and CH) – all in the same bottle! Spa water treated with EZ SPA® remains scale free and foam free. The convenient, once-a-week application allows spa owners to spend more time enjoying the spa and less time troubleshooting and maintaining it. EZ SPA® is compatible with ozone and mineral purifiers as well as balancers and traditional sanitizers (chlorine and bromine).
How does EZ SPA® TOTAL CARE work?
TOTAL CARE is simple to use. Its concentrated formula oxidizes contaminants, conditions and clarifies, inhibits scale and foam, and maintains water balance. After the initial water balance, add EZ SPA® just once a week with E-Z SPA BOOST™ for clean, clear spa water.
Why is EZ SPA® TOTAL CARE better than other products?
Other spa chemical lines are based on reactive science: wait until you have a problem, attempt to diagnose with complicated testing, and then treat by adding a multitude of chemicals that might fix the problem. EZ SPA® TOTAL CARE works on PROACTIVE science: you actually prevent water problems (foaming, odors, pH imbalance, cloudiness) rather than adding more chemicals to treat them after they occur.
What is included in the EZ SPA® CARE KIT?
The spa care kit includes: TOTAL CARE (1 lb.), START (8 fl oz.), BOOST (1 lb.), CAL (1 lb.), UP (1 lb.), DOWN (1.5 lb.), test strips and a measuring scoop.
Where can I find EZ SPA®?
EZ SPA® is available exclusively from swimming pool and spa professional retailers. CLICK HERE for more information.
Why doesn’t my spa smell anymore?
The specialty blended products within EZ SPA® TOTAL CARE increase the active oxygen in your spa water which helps keep typical treated water odors from forming.
Can I use EZ SPA® with Bromine?
Yes! Weekly use of EZ SPA® E-Z BOOST puts a minuscule amount of chlorine in the water, but if that minuscule amount is too much, a bromine tablet will suffice, as well.
How often do I drain my spa?
With typical usage, spas using the EZ SPA® program should be drained about every 6-8 months. Spas not being treated with EZ SPA® should be drained every 3-4 months, again, depending on usage.
Do I need to drain my spa to use EZ SPA®?
If it is time to drain your spa, you should drain it prior to starting the EZ SPA® program. If your spa water is under two months old, simply balance the water to provided parameters on product label and start with EZ SPA®.
Why is my spa water foamy?
Foamy spa water very often indicates an excess of organic waste, it can also be attributed to a high surface tension, or both. It is very rare to experience foam while on the EZ SPA® program. If you do, adding the weekly dose of EZ SPA® TOTAL CARE and E-Z BOOST should fix the issue in a matter of hours, or less.
What are the water balance parameters for my spa?
pH 7.2-7.6, TA 80-120ppm, Ch>300ppm, CA 0-25ppm, TB or TC 0.5-2.0ppm
- What is EZ SPA® TOTAL CARE?
“We are very happy with this product…We were using Baqua spa and anticipated some problems because of the chemical change but now the water is as fresh and clear as the day we first filled our tub!”
– Lori K., Kentucky
“We run our spa year-round and EZ Spa® has worked for us. Works great to keep the spa clean!”
– Barbara S., Minnesota
“I have used the EZ Spa® now for four years. It is the best spa treatment I have ever used. It makes the water feel really soft and refreshing. I use it once a week and forget it. My spa stays crystal clear. I love this stuff. Not to mention when you use EZ Spa® you don’t have to buy so many other chemicals. I also noticed that EZ Spa® is extremely gentle on the skin. I can’t say enough about how good this stuff is. Try it, you’ll love it!”
– Terri G., NJ
“I am using EZ Spa® and I love it!”
– Cathy, Florida