How To Use E-Z POOL^®

 

3-Step Startup

Step 1: Test & Revive!^®
Take a water sample to your Authorized Dealer for testing. Treat pool water with Revive (32oz per 24k gallons) to remove phosphates, metals, debris and to activate NO ALGAE GUARANTEED!

Note: If algae are present, brush from walls and then shock with chlorine. Wait 24 hours, and proceed.

Step 2: Vacuum, clean filter & balance
Once debris completely settles (typically 24 hours), vacuum pool bottom, thoroughly clean pool filter, then balance pool water.

Water Balance Parameters

pH 7.2-7.6

TA 80-120ppm

CH 250-400ppm

CYA 30-80ppm

FC 1.5-3.0ppm

TC 1.5-3.0ppm

Step 3: EZ Day
Add E-Z POOL^® to pool water according to dosage chart found on pail, preferably near a return jet, add sanitizer in accordance with product directions to skimmer, feeder or floater to maintain desired level.

Note for portable "POP-UP" Pools (less than 3000 gallons), add one scoop of E-Z POOL^® in front of the return jet and adjust sanitizer level in accordance with product directions by placing 1" tablets in the middle of the cartridge filter.  Be sure to rinse the cartridge filter each time you add 1" tabs.

                                                                                 

Weekly:
Repeat EZ DAY...just once a week!

Monthly:
Take a water sample to your Authorized Dealer for testing.